Products

Barilla TZ20 on A-Frame

• Evacuated Tube Heat Pipe Collectors
• 1800mm x 58mm Double Walled Evacuated Tubes
• Available in 10, 15, 20, 25 and 30 Tube Panels
• High efficiency η0 = 73.4% and low heat loss
• Very reliable with zero maintenance
• Quick to assemble and install
• A-Frame mounting kit available
• Can be used with propylene glycol for freeze protection

Dektite Roof Slates

DN16 Connector Set

Pipe Fittings to Suit Stainless Flexi Pipe

Duo-Solar Preinsulated Stainless Pipe

Available in DN16 and DN20 pipe bores with UV resistant Class 0 HT insulation

DN20 sold in 25m rolls, DN16 sold in 10m, 15m, 20m & 25m rolls

Quick to fit, reliable and durable pipwork, complete with sensor cable
 

Expansion Vessels

Flowcon D2F Pump Station

Twin Pump, three line pump station for east-west split solar arrays

Gledhill Stainless Lite

• Single and Twin Coil Stainless Steel Cylinders
  180L / 210L / 250L / 300L sizes available
• Direct or Indirect Primary Input Options
  Direct models fitted with twin immersion heaters
• Supplied with all fittings
  including expansion vessel, immersion heater, safety valves
• Solar Coil rated at 19kW
• Low Standing Heat Losses
  1.40 kWh/24 hours (180L Model)
• Quick Recovery Time

Gledhill Sunspeed Vented Cylinder

• Twin Coil Copper Cylinders
  114 - 318 Litres Capacity
• High Efficiency Solar Coil
  Designed to operate at lower input temperatures
• Built to Order
  Size and locations of tappings can be custom specified
• High Performance Flexilag Insulation
  Minimise standing heat losses
• Range of Diameters Available
  400mm / 450mm / 500mm
• 22mm or 28mm Plain Copper Boiler Coil
  Complies with BS1566 and Part L Building Regulations

Pool Heat Exchanger

Bowman Heat Exchangers to allow solar heating of swimming pools and spas.

Supplied with 1.5" and 2" end fittings for pool circuit.
 

Resol Flowcon B

Standard dual line pump station for integration into a solar return line.

Ideal for use on larger collector arrays, particularly pool systems.

Normally supplied with Resol Deltasol BS/Plus twin relay variable speed controller
 

Resol Flowcon S Pump Station

Standard single line pump station for integration into a solar return line.

Normally supplied with a Resol Deltasol BS/4 or BS/Plus Controller.

Includes manual vent, wall mounting fixings and fill/flush connections.
 

Solar Fluid 5l - 20l

Propylene Glycol with inhibitor to offer freeze protection to sealed solar circuits

Available in 5, 10 and 20 litre containers - Mixes 2:1 with water
 

SP58-20 EVT Collector Panel

Stainless Roof Bolt

Roof Mounting Bolt
Stainless Steel M10 x 200mm